Well, in my spare time, I have started work on the 5x8 Wells Cargo trailer I bought from Whitey.  First I painted the interior with four coats of oil base high gloss White paint to brighten things up. Next, I applied a leveler to the plywood floor butt-ends to smooth any bumps.  I used self adhesive tiles; but, also prepared the floor with Armstrong 515 thin-set adhesive.  I was pleased with the results as the tiles are very aggressively bonded to the floor.  I added self adjusting jackstands to the trailer back end to prevent turtling, an AC input plug, replaced the weather stripping around the door, re-did the chaulking, repaired the door anchor stop and touched up some minor surface rust. Stuff left to do:  Install roof vent, install E track, power bars, battery power, Metal tongue box, LED Lighting, Install Solar power exhaust vent fan and insulate ceiling with double bubble foil.  I also plan to paint the wheel rims and the trailer frame.  I have a few ideas, for setups, to hold the planes secure that I think will work well.  I want something that will adjust and quickly secure the planes I will be carrying that day.  I wasn't keen on using the E track at first; but, reconsidered after looking over a few designs.  Will post more pictures as the project continues.

Bruce