Avon Flyers Forum Home | |
https://www.avonflyers.ns.ca/cgi-bin/Forum/yabb2/YaBB.pl
Avon Radio Control Flyers Discussion Area >> General Board >> Primers and fillers https://www.avonflyers.ns.ca/cgi-bin/Forum/yabb2/YaBB.pl?num=1487436504 Message started by yorcram on Feb 18th, 2017 at 12:48pm |
Title: Primers and fillers Post by yorcram on Feb 18th, 2017 at 12:48pm
Wondering what people prefer for fiberglass and balsa planes.
Marc |
Title: Re: Primers and fillers Post by Fingers on Feb 18th, 2017 at 3:48pm
Todd would be the man to speak to.....
|
Title: Re: Primers and fillers Post by MkIX on Feb 19th, 2017 at 2:02pm
Sandy's right...Todd would be the best source.
But for whatever it may be worth, I've been using a product in a rattle can called Dupli-Colour Filler Primer to prime my models, and Bondo Glazing and Spot Putty to fill in dimples, dents, voids, etc. I get the primer from PartSource on the Cobiquid Rd. Bondo from Cdn Tire. |
Avon Flyers Forum Home » Powered by YaBB 2.4! YaBB Forum Software © 2000-2024. All Rights Reserved. |