Avon Flyers Forum Home | |
https://www.avonflyers.ns.ca/cgi-bin/Forum/yabb2/YaBB.pl
Avon Radio Control Flyers Discussion Area >> General Board >> Helicoil inserts for 50cc engines... https://www.avonflyers.ns.ca/cgi-bin/Forum/yabb2/YaBB.pl?num=1337007574 Message started by Brian on May 14th, 2012 at 10:59am |
Title: Helicoil inserts for 50cc engines... Post by Brian on May 14th, 2012 at 10:59am
Hi Guys,
After trying out several machine shops and small engine repair places i could not find anyone to put in a helicoil for less than $55 bucks. So, i bought the kit! So, if there is anyone out there needing to have a helicoil put into their cylinder heads for an NGK CM-6 plug, i can do it for you! A small donation would be appreciated to help with the kit cost... Thanks, Brian |
Title: Re: Helicoil inserts for 50cc engines... Post by administrator on May 14th, 2012 at 11:45am
Just curious Brian. What was the cost for the kit. I heard they were quite expensive.
Bruce |
Title: Re: Helicoil inserts for 50cc engines... Post by Brian on May 14th, 2012 at 8:13pm
yup, but i bought a used kit at Nova Automotive
got all the taps and about 30 helicoils for about 75 bucks. I have already fixed my cylinder head and it looks great! I learned from the guy there that since these engines were designed they have gone to a bit larger and longer plug to stop them stripping, and that they don't see a lot of this size anymore....that's why they sold me the kit. I will do inserts for say 5 bucks? or what you want to donate. They only take about 5 minutes to do, so it's no big deal. Just trying to recoop a bit for the purchase..... Brian |
Avon Flyers Forum Home » Powered by YaBB 2.4! YaBB Forum Software © 2000-2024. All Rights Reserved. |