Avon Flyers Forum Home
http://www.avonflyers.ns.ca/cgi-bin/Forum/yabb2/YaBB.pl
Avon Radio Control Flyers Discussion Area >> Working on a Project? >> Doing some testing today
http://www.avonflyers.ns.ca/cgi-bin/Forum/yabb2/YaBB.pl?num=1586022553

Message started by Greg G on Apr 4th, 2020 at 1:49pm

Title: Doing some testing today
Post by Greg G on Apr 4th, 2020 at 1:49pm
[url][/url]Had to get out of the house so I was making and testing home made smoke nozzles for the turbine. The attached video shows my last test but an earlier nozzle version put out much more smoke with the same injection rate. Guessing 2 to 3 times as much. It certainly was a very noticeable difference! Unfortunately I didn’t think to get a video of that test. I think my neighbor 150 feet away did get a video but I couldn’t see him for smoke. He did give me thumbs up though once the smoke cleared👍
Smoke oil I used is a 50/50 mix of diesel and mineral oil.

https://share.icloud.com/photos/0aE1HQEbsRjK0cS_8Xtm8QJVg

Title: Re: Doing some testing today
Post by Fingers on Apr 4th, 2020 at 2:11pm
Very impressive Greg! That'll be near in the air.

Title: Re: Doing some testing today
Post by Greg G on Apr 5th, 2020 at 4:59pm
More testing today and I settled on this nozzle working the best!

https://share.icloud.com/photos/0PxXHaXDdyslFieCSs_aphl3A

Smoke definitely is the most dense with it.

Avon Flyers Forum Home » Powered by YaBB 2.4!
YaBB Forum Software © 2000-2024. All Rights Reserved.