Avon Flyers Forum Home
https://www.avonflyers.ns.ca/cgi-bin/Forum/yabb2/YaBB.pl
Avon Radio Control Flyers Discussion Area >> General Board >> Storage Comtainer
https://www.avonflyers.ns.ca/cgi-bin/Forum/yabb2/YaBB.pl?num=1529428835

Message started by dano on Jun 19th, 2018 at 1:20pm

Title: Storage Comtainer
Post by dano on Jun 19th, 2018 at 1:20pm
Sandy and I visited CTS Containers this morning.
A purchase was made for a used 20ft. container.
It is scheduled for delivery tomorrow, Wednesday June 20 (AM).
The exact time is not known.

If any members are intending to fly tomorrow (or not) some volunteers would be helpful to move the items from the old sheds into the container and some minor ground work.

I wouldn't like to see Grassman do this by himself as we know
that he would.

Again, thanks to the members who helped make this project successful.
pic1.jpg (3910 KB | 243 )

Title: Re: Storage Comtainer
Post by recoil on Jun 19th, 2018 at 2:50pm
Hi Dan. I am tied up on Wednesday but expect to go flying on Thursday and will spray a good lubricant on the hinges. Rae.

Title: Re: Storage Comtainer
Post by dano on Jun 21st, 2018 at 5:53am
Wayne and I were only able to get the Container in position on the crushed stone.
Some tractor work remains to spread the stone to an angle towards the container doors.
Dave Porter has once again offered to do this and to transport the mowers for service next week. THANKS DAVE

-The older tractor (2015) will be going to Griffins Equip. Monday to have the axle seals replaced. (there's over 200 hard hours on this machine).

-Some volunteers will be needed Saturday to move the items from the old sheds to the container.

Once the old sheds are empty they will be removed.

Title: Re: Storage Comtainer
Post by recoil on Jun 22nd, 2018 at 4:17pm
The new container is just great. Looks like it is in perfect condition. A good investment and should last a lifetime.

Title: Re: Storage Comtainer
Post by dano on Jun 23rd, 2018 at 2:19pm
The old sheds have been removed and the their contents shifted to our container.
Also, Al Coolen has shifted the mower lift and re-installed it on the container.
Some grading towards the container doors remains and will be finished in a few days.

A special thanks to Grassman for moving much of the equipment and arranging the removal of the old sheds.

Avon Flyers Forum Home » Powered by YaBB 2.4!
YaBB Forum Software © 2000-2024. All Rights Reserved.