Avon Flyers Forum Home

Avon Flyers Forum Home
http://www.avonflyers.ns.ca/cgi-bin/Forum/yabb2/YaBB.pl Avon Radio Control Flyers Discussion Area >> General Board >> Ammo Box wood stove http://www.avonflyers.ns.ca/cgi-bin/Forum/yabb2/YaBB.pl?num=1520965628 Message started by JackDD on Mar 13^th, 2018 at 2:27pm

Title: Ammo Box wood stove
Post by JackDD on Mar 13^th, 2018 at 2:27pm

Well no plane to build and a cold workshop, inspired me..
Ammo Box wood stove

need a 3" hole in the top and four legs.. fire grate .. draft regulator..and good to go..

all from spare parts..

DSCN1140.JPG (781 KB | 179 )

Title: Re: Ammo Box wood stove
Post by Fingers on Mar 13^th, 2018 at 3:44pm

Better use for the box than some uses......ingenuity at it's best!!

Title: Re: Ammo Box wood stove
Post by Glen on Mar 13^th, 2018 at 3:57pm

Hope you took the rubber out of the lid :D

Title: Re: Ammo Box wood stove
Post by JackDD on Mar 13^th, 2018 at 4:02pm

Glen, Stove door seal around lid...

DSCN1142.JPG (804 KB | 169 )

Title: Re: Ammo Box wood stove
Post by JackDD on Mar 15^th, 2018 at 1:39pm

Cutting 3" holes was troublesum, just 4 legs then test lite...
Hope theres no residue powder? :D

Thinking of making the legs pivot for easy transport and storage..

DSCN1143.JPG (788 KB | 170 )

Title: Re: Ammo Box wood stove
Post by waverider on Mar 15^th, 2018 at 6:44pm

Don’t forget to have a carbon monoxide detector handy

Title: Re: Ammo Box wood stove
Post by Yak Man on Mar 16^th, 2018 at 5:20am

What a neat project Jack! Looks like you will be able to work in your garage soon. Going to need a lot of little logs! ;D

Title: Re: Ammo Box wood stove
Post by whitey on Mar 16^th, 2018 at 10:44am

You can also get an action GI Joe to make your furnace look really big!

1d36fba09d3b0acdbe5260d659121f02.jpg (183 KB | 150 )

Title: Re: Ammo Box wood stove
Post by JackDD on Mar 16^th, 2018 at 2:03pm

Haha it will keep the mice warm tho..

gonna steal frans cooky sheet for the base.

DSCN1144.JPG (787 KB | 184 )

Title: Re: Ammo Box wood stove
Post by dano on Mar 16^th, 2018 at 3:34pm

Jack, it looks like it can walk?
At what point did it go from stove to furnace?
Neat little project Jack!

Title: Re: Ammo Box wood stove
Post by JackDD on Mar 17^th, 2018 at 6:34am

yes Dan, everything was lying around, all I bought was the 2 pieces of stovepipe from home Depot, $4 a length..