Avon Flyers Forum Home

Avon Flyers Forum Home
http://www.avonflyers.ns.ca/cgi-bin/Forum/yabb2/YaBB.pl Avon Radio Control Flyers Discussion Area >> General Board >> DREMEL TOOLS http://www.avonflyers.ns.ca/cgi-bin/Forum/yabb2/YaBB.pl?num=1505932567 Message started by Fingers on Sep 20^th, 2017 at 2:36pm

Title: DREMEL TOOLS
Post by Fingers on Sep 20^th, 2017 at 2:36pm

Had reason to take my Dremel apart, then order a part...

Dremel Canada is at Giles Tool Agencies, Toronto

1 800 268-4255

and the order lady is at extension 227.

Phoned today, part going out today [smiley=tekst-toppie.gif]

Title: Re: DREMEL TOOLS
Post by whitey on Sep 21^st, 2017 at 9:18am

Did you sheer the plastic coupler connecting the motor to the drive shaft?

Title: Re: DREMEL TOOLS
Post by Fingers on Sep 21^st, 2017 at 10:55am

That's the part Mike. Very common in the models that use them...
Didn't shear mine, looks much like it melted - likely when I was trying to get the 90deg working....

Title: Re: DREMEL TOOLS
Post by whitey on Sep 25^th, 2017 at 8:26am

I sheared them on a regular basis. Finally gave up and bought a different tool.

Title: Re: DREMEL TOOLS
Post by Fingers on Sep 27^th, 2017 at 5:46pm

and arrived [smiley=tekst-toppie.gif]

first I've ever sheared Mike

Title: Re: DREMEL TOOLS
Post by whitey on Sep 28^th, 2017 at 6:49am

They're a good thing to have a few
on hand. They do save the motor.

Title: Re: DREMEL TOOLS
Post by MkIX on Sep 28^th, 2017 at 5:13pm

The coupler in mine sheared a few years ago. Got a replacement at Sears. Their rotary tool uses the same part.