| Avon Flyers Forum Home | |
|
https://www.avonflyers.ns.ca/cgi-bin/Forum/yabb2/YaBB.pl
Avon Radio Control Flyers Discussion Area >> RC Tips and Tricks >> Factory Setting For Idle Screw - ASP FS120AR 4 stroke https://www.avonflyers.ns.ca/cgi-bin/Forum/yabb2/YaBB.pl?num=1374268687 Message started by administrator on Jul 19th, 2013 at 5:18pm |
|
|
Title: Factory Setting For Idle Screw - ASP FS120AR 4 stroke Post by administrator on Jul 19th, 2013 at 5:18pm
Slowly screw the idle screw out (Counter Clockwise) until it stops. Then screw it in (Clockwise) six full turns. You are now at the Factory settings for an ASP FS120AR 4 stroke. :)
Bruce |
|
Avon Flyers Forum Home » Powered by YaBB 2.4! YaBB Forum Software © 2000-2024. All Rights Reserved. |