Avon Flyers Forum Home | |
https://www.avonflyers.ns.ca/cgi-bin/Forum/yabb2/YaBB.pl
Avon Radio Control Flyers Discussion Area >> RC Tips and Tricks >> Solution to remove CA Fogging from Canopy plastic https://www.avonflyers.ns.ca/cgi-bin/Forum/yabb2/YaBB.pl?num=1357495207 Message started by Ben Lann on Jan 6th, 2013 at 2:00pm |
Title: Solution to remove CA Fogging from Canopy plastic Post by Ben Lann on Jan 6th, 2013 at 2:00pm
Just curious if anyone had any solutions for removing CA Fogging from a clear canopy?
I had a little accident with my new Yak and some thin CA. Actually i guess it was more the debonder reacting with the CA on the plastic. |
Title: Re: Solution to remove CA Fogging from Canopy plastic Post by Danster on Jan 7th, 2013 at 12:08am
Wax it using a car wax that has polisher / fine grit. Should buff right out.
|
Title: Re: Solution to remove CA Fogging from Canopy plastic Post by Ben Lann on Jan 7th, 2013 at 10:30am
Ok I'll try that. Thanks!
|
Title: Re: Solution to remove CA Fogging from Canopy plastic Post by Ben Lann on Jan 7th, 2013 at 1:50pm
I am happy to report my canopy is more or less as good as new.
I ended up using Miguair's ScratchX™ 2.0 Cleaner with an auto detailing sponge. All items were purchased at Canadian Tire. Thanks Dan, Paul and Mike! |
Avon Flyers Forum Home » Powered by YaBB 2.4! YaBB Forum Software © 2000-2024. All Rights Reserved. |