Avon Flyers Forum Home | |
https://www.avonflyers.ns.ca/cgi-bin/Forum/yabb2/YaBB.pl
Avon Radio Control Flyers Discussion Area >> General Board >> Hysol 9462 cartridge https://www.avonflyers.ns.ca/cgi-bin/Forum/yabb2/YaBB.pl?num=1340372936 Message started by waverider on Jun 22nd, 2012 at 9:48am |
Title: Hysol 9462 cartridge Post by waverider on Jun 22nd, 2012 at 9:48am
I can order up to 6 in an order then
shipping then jumps from $12.50 to $19.50 for the lot the price per is $15.95 each (plus tax) who wants Hysol 9462 ?????????????? |
Title: Re: Hysol 9462 cartridge Post by administrator on Jun 22nd, 2012 at 10:43am
Put me down for one. Thanks Bruce
|
Title: Re: Hysol 9462 cartridge Post by Fingers on Jun 22nd, 2012 at 12:21pm
sounds good....I'll take one
|
Title: Re: Hysol 9462 cartridge Post by waverider on Jun 22nd, 2012 at 5:13pm
errors and omissions
I did not indicate that the shipping portion is extra 12.5/6* n Brian:( |
Title: Re: Hysol 9462 cartridge Post by waverider on Jun 26th, 2012 at 6:24pm
not enough interest to warrant an order....yet???????
|
Title: Re: Hysol 9462 cartridge Post by painter on Jun 26th, 2012 at 6:35pm
I will take one.
Todd |
Title: Re: Hysol 9462 cartridge Post by Glen on Jun 26th, 2012 at 6:44pm
I'll take one as well.
|
Title: Re: Hysol 9462 cartridge Post by Fingers on Jun 26th, 2012 at 7:32pm
that puts you at 5....
|
Title: Re: Hysol 9462 cartridge Post by waverider on Jun 26th, 2012 at 8:03pm
they are only 50ml ~which is a small large scotch
trying to find the 200ml and cheaper prices Brian |
Title: Re: Hysol 9462 cartridge Post by Murray on Jun 26th, 2012 at 10:05pm |
Title: Re: Hysol 9462 cartridge Post by waverider on Jun 26th, 2012 at 11:48pm
US vendor could be problematic
shipping, duty etc. this is a hazardous material under the MSDRS I will try Acklands-Granger they are supposed to be a Loctite distributor Brian H |
Title: Re: Hysol 9462 cartridge Post by whitey on Jun 27th, 2012 at 9:53am
Been down the Aukland Granger and all those other suppliers in Burnside and I found it frustrating. Either expensive or they couldn't get it. One thing I did find out was that to make it at all viable, you needed to order a large quantity. You can call these guys, as they said they could order it in.
Motion Canada 50 Akerley Boulevard Unit 4 Dartmouth, NS B3B 1R8 Canada Phone: 902-438-3231 Fax: 902-468-2195 Website |
Title: Re: Hysol 9462 cartridge Post by Danster on Jun 28th, 2012 at 12:35am
Last box I ordered in was a full case of 12 I think, making average cost $11 each. Just need to remember where I ordered from...
|
Title: Re: Hysol 9462 cartridge Post by waverider on Jun 28th, 2012 at 8:56pm
I did not do anything today on this
It was my birthday :) |
Title: Re: Hysol 9462 50 ml cartridge OR E-60HP Higher shear strength Post by waverider on Jun 29th, 2012 at 11:35am
I am taking 2
that make 6 to now >>>>>E-60HP is a higher shear strength impact toughened adhesive If I buy a case it would be $11.54 plus tax. FOB Burnside about a week and a half to 2 weeks There is 10 in a case >>>>>>the 9462 would 14.49$ plus tax ::) ::) ::) ::) ::) ::) ::) ::) ::) ::) |
Title: Re: Hysol 9462 cartridge Post by waverider on Jun 29th, 2012 at 11:39am Murray wrote on Jun 26th, 2012 at 10:05pm:
shipping from states would be at least 25$ may be duty and brokerage, also. |
Title: Re: Hysol 9462 cartridge Post by Murray on Jun 29th, 2012 at 3:30pm waverider wrote on Jun 29th, 2012 at 11:39am:
You are correct sir. I didn't notice that they use the evil UPS for shipping. |
Title: Re: Hysol 9462 cartridge Post by Danster on Jul 3rd, 2012 at 9:37am
Guys - I just ordered a new case of ten from the same palce I got my last batch. It was 2009 when I gt my first case and it worked out to be $14.11.
Well, it is now 2012 and the price shipped to Dartmouth is $16.11. I just have to go pick it up when it comes in. You can beat this to death and you are not going to get much of a better deal than what is advertised, even on Altecare's website, but you would still need to pay shipping from Ontario, so I think $16 a tube is about as good as it's going to get. Dan |
Title: Re: Hysol 9462 cartridge Post by administrator on Jul 3rd, 2012 at 11:24am
Hi Dan: Put me down for two please.
Bruce |
Title: Re: Hysol 9462 cartridge Post by waverider on Jul 3rd, 2012 at 12:13pm
ready fire aim Dan
I had a price of 14.49 but i will take 2 Brian |
Title: Hysol 9462 Epoxy Post by waverider on Jul 23rd, 2012 at 8:40am
I ordered 10 of these today
Please confirm your orders each to me thanks |
Title: Re: Hysol 9462 cartridge Post by administrator on Jul 23rd, 2012 at 9:13am
Ten for me Brian. ;D
Two Please |
Title: Re: Hysol 9462 cartridge Post by Danster on Jul 25th, 2012 at 8:00am
Well, I just picked up my case of ten yesterday. $16 plus the taxes is the best part of a $19 bill.
So from the posts, no one needs any tubes from me then? No problems, as I will always need some and this will last for many projects. Just curious Brian, what did yours cost you after taxes and shipping? It is also interesting to note that you were looking for the larger 200ml size cartridges... do you realize how big those are? I have 10 tubes, Al spoke for one. I am keeping 4 of them, so 5 remains for sale. Dan |
Title: Re: Hysol 9462 cartridge Post by administrator on Jul 25th, 2012 at 8:46am
Dan I'll still get two from you. The shelf life on that stuff is good for a long time.
Bruce |
Title: Re: Hysol 9462 cartridge Post by Danster on Jul 25th, 2012 at 2:44pm
No worries Bruce. I will bring them with me to the field tonight, as I am heading there for 5:30 with Glen to do a cutting.
Dan |
Title: Re: Hysol 9462 cartridge Post by waverider on Jul 25th, 2012 at 6:03pm
I am not sure what is going on here
I ordered the Hysol after discussion at the field recently The determination was that Dan had ordered the epoxy for himself Although somewhat reluctant I ordered the Hysol the following Monday I am confused |
Title: Re: Hysol 9462 cartridge Post by Glen on Jul 25th, 2012 at 8:08pm
I still want one.
|
Title: Re: Hysol 9462 cartridge Post by Shane Morse on Jul 25th, 2012 at 9:22pm
I would like one too.
|
Title: Re: Hysol 9462 cartridge Post by administrator on Jul 25th, 2012 at 9:33pm
I still want two from you Brian.
Bruce |
Title: Re: Hysol 9462 cartridge Post by Revx on Aug 3rd, 2012 at 7:39pm
Hey guys, to bad i didnt know 2 of you were ordering a case. MacGregors Custom Machining 2min from New Glasgow will sell/order single 50ml tubes for $19.78ea +tx. It took 3 days to get it and has to come by ground only because of the msds sheets. They also dont charge shipping. It has a shelf life of approx 2 years and the expiry date is stamped on it. For those who dont know you have to order the plastic plunger ($5.00) or dispensing gun ($35) seperate. It comes with nothing but 50ml cartridge for despening gun. I will menton to others and let them know you have a few tubes available. For other info, BDI bearings also in New Glasgow is $14.95ea but need to purchase a case of 10 and Ackland Granger is $30.00 a 50ml tube, yeap that isnt a typo. Anyways I ordered and received 3 tubes that will do me for a few months. :)
|
Title: Re: Hysol 9462 cartridge Post by Ben Lann on Aug 6th, 2012 at 3:01pm
Those three tubes might last you maybe half of indoor season hehe :D
Revx wrote on Aug 3rd, 2012 at 7:39pm:
|
Avon Flyers Forum Home » Powered by YaBB 2.4! YaBB Forum Software © 2000-2024. All Rights Reserved. |