Avon Flyers Forum Home | |
https://www.avonflyers.ns.ca/cgi-bin/Forum/yabb2/YaBB.pl
Avon Radio Control Flyers Discussion Area >> The Bone Yard >> A Blender Moment https://www.avonflyers.ns.ca/cgi-bin/Forum/yabb2/YaBB.pl?num=1337572807 Message started by administrator on May 21st, 2012 at 12:00am |
Title: A Blender Moment Post by administrator on May 21st, 2012 at 12:00am
I'm so Sad. :'( :'( :'( I put a hole in the wing. :( :(
Now I'll have to do Blenders with my Twist. [smiley=evil.gif] [smiley=evil.gif] Mr Blender |
Title: Re: Epic Flying? May 19 - 21 (Weekend + 1) Post by Yak Man on May 20th, 2012 at 6:40pm
Mr Blender put on quite a show in the late afternoon. The PA system was on so I anounced
"Bruce do a blender" well I never seen anyone get so starry eyed and in the face of fame before! He did a perfact blender RIGHT INTO THE GROUND. Well it was a sight to be seen [smiley=tekst-toppie.gif] It was a good one! An RC moment to remember!!! ;D ;D |
Title: Re: Epic Flying? May 19 - 21 (Weekend + 1) Post by Fingers on May 20th, 2012 at 7:29pm
I gather he didn't repeat it ???? :D
Wish I'd been there Bruce - I always have a roll of duct tape in the car..... |
Title: Re: A Blender Moment Post by Grant on May 21st, 2012 at 7:10am
Hi Guys
I saw Mr Blender fly Sat and coming straight down and wondered how that poor plane was going to survive the day. I guess two days in a roll it wasn,t gonna take it anymore. Sorry to hear about the loss . Good thing planes can't Talk. Grant |
Title: Re: A Blender Moment Post by Glen on May 21st, 2012 at 7:44pm
I assume this means Al is banned from the PA system ?
;D |
Title: Re: A Blender Moment Post by Yak Man on May 21st, 2012 at 8:13pm
;D
|
Title: Re: A Blender Moment Post by Brian on May 22nd, 2012 at 4:44am
Hi Bruce,
Sorry about your plane. You can post the pictures of my extra 300 if you like... Brian |
Title: Re: A Blender Moment Post by JackDD on May 22nd, 2012 at 6:31am
Haha..
Mine had a bigger Debris Field... :o Jack |
Title: Re: A Blender Moment Post by Davy Crockett on May 22nd, 2012 at 8:03am
I found half of your spinner yesterday Jack! It had to have been 100 ft from the point of impact. LOL...
|
Title: Re: A Blender Moment Post by Brian on May 22nd, 2012 at 8:35am
hey Jack, what did you crash?
Brian |
Title: Re: A Blender Moment Post by Fingers on May 22nd, 2012 at 1:16pm Davy Crockett wrote on May 22nd, 2012 at 8:03am:
Field rule #367 - Pick up your debris!!!!! All of it!!! >:( |
Title: Re: A Blender Moment Post by Glen on May 23rd, 2012 at 8:42pm
and replace your divots!
;D ;D |
Title: Re: A Blender Moment Post by administrator on May 24th, 2012 at 10:44pm
Well I have another Tribute 36 on order and it should be here soon. It's a fun plane and I did have about 60 hours on the Air Frame. That's 600 ten minute flights with about 200 blender maneuvers. Can't really complain.
Grant wrote on May 21st, 2012 at 7:10am:
They can Grant. Their saying "Blender Me - Weeeeeeee!!" ;D ;D ;D |
Avon Flyers Forum Home » Powered by YaBB 2.4! YaBB Forum Software © 2000-2024. All Rights Reserved. |